Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateFast, Reliable Garage Door Installation Across Englewood
If you live in Englewood and your garage door has taken one too many hail hits, or you’re finally replacing the original door on a 1950s ranch, you’re in the right place. We handle new garage door installation across Englewood, from single-car openings on the older blocks near Bates and Logan to two-car doors on the tract homes closer to the Denver Tech Center edge. Front Range weather is hard on doors, and Englewood’s housing stock is older than most of the metro. That combination matters when you’re ordering a new door.
Call (866) 369-6074 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Englewood Homeowners Call Garage Door Repair Washington Park for Garage Door Installation
Garage doors are all we do. We’re a single-trade specialist, not a handyman outfit or a multi-service contractor where a garage door is one line on a long menu. That focus is why Englewood homeowners call us: every visit is handled by a garage door expert who already knows the brand in your garage and what typically fails on it. Our technicians have up to 12 years of experience, and they’re vetted local professionals who are licensed and insured as the state requires. We connect you with a pro who does the measuring, the framing assessment, and the install.
We know Englewood’s neighborhoods block by block, from the older ranches off South Broadway to the homes near Craig Hospital, and we understand why the doors here fail the way they do. We work on eight of the most widely installed garage door and opener brands in North America, so there’s no guesswork when you tell us what’s hanging in your garage.
Estimates are always free. The price is quoted and agreed before any work starts, so you won’t get an invoice that looks nothing like the number you said yes to.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Our Garage Door Installation Services in Englewood
New Door Installation
A full new door installation in Englewood starts with measuring the rough opening, not with a catalog. On the city’s post-war ranch stock, that measurement often turns up an out-of-square wood jamb or a header that sits lower than a modern door expects. We account for that before the door is ordered, so the install isn’t a surprise. You get a door that fits the opening you actually have.

Single Car Door
Single-car doors are the norm on the older Englewood blocks, where attached one-car garages were standard on post-WWII brick and frame homes. A failing original single door on these houses usually means new track mounting and header reinforcement alongside the door itself. We size the door to the opening and check the spring cycle rating to match the weight.

Double Car Door
Toward the Denver Tech Center edge, in the 1970s-80s subdivisions and around ZIP 80111, two-car garages are more common. Double doors put more load on the torsion system and the opener, so we match the spring and opener to the door weight rather than reusing aging hardware. That’s where a new door and a fresh opener rail tend to go in together.

Custom Garage Door
Custom work makes sense when the opening isn’t standard, and in Englewood that’s more frequent than you’d expect. Original wood jamb framing from the 1950s-60s often needs custom track mounting rather than assuming modern dimensions. We also handle custom sizing for wind-rated doors and steel or wood panels to match the look of the house.
Why Englewood’s Low-Clearance Openings Need Custom Measuring
This is the detail that separates Englewood from newer suburbs, and it’s the one we plan every install around. Many of Englewood’s post-war ranch homes have low-clearance garage openings with original wood jambs. Installing a new sectional door on one of these usually requires custom track mounting and header reinforcement rather than assuming modern dimensions. That quirk rarely comes up in places like Littleton or Highlands Ranch, where the openings were framed to newer standards. In Englewood, it’s the norm.
Here’s how a typical job usually goes. A technician measures the rough opening and then typically finds the original wood jamb is out of square or the header is too low for a modern door, especially on 1950s-60s builds. From there the work includes checking the torsion spring cycle rating (standard 10,000 vs. high-cycle 25,000) and reinforcing or rebuilding the framing before hanging a wind-rated sectional door with proper track alignment and spring balance. Because many doors here are first replacements on aging homes, the job also includes upgrading to photo-eye sensors and a newer opener rail to handle the door’s weight reliably. Measuring first, ordering second, and framing before hanging is what keeps a new door working through a full Front Range storm season.
Trusted Brands We Service in Englewood
We work on the brand you already have, and that’s a head start on any installation. We’re factory-familiar with Clopay, Amarr, Wayne Dalton, and Craftsman, plus LiftMaster, Chamberlain, Genie, and Raynor on the opener side. That means when you tell us what’s in your garage, the technician already knows its quirks and how it fits a new install. We don’t stock parts on a truck or in a warehouse; we source them so the door and hardware match up cleanly. If your existing door is one of those brands, the new install can usually work from a known starting point instead of a fresh assessment of unfamiliar equipment.
Common Garage Door Installation Problems We See in Englewood Homes
- Rotted or out-of-square wood jambs. Freeze-thaw cycles work on the original wood jamb framing on 1950s-60s ranches, and once the jamb is out of true, new door tracks misalign and cables rub. Framing repair is often the first step, not the last.
- Hail-dented steel doors with no matching panels. Hail dents older steel and aluminum doors panel by panel, and after a Front Range hailstorm we get a wave of insurance-driven panel-replacement and door-replacement calls on the same tract-home streets. When the panel profile is discontinued on an older model, a full door replacement is usually the only way to keep the door’s wind rating intact.
- Spring fatigue from wind and out-of-balance doors. Chinook wind gusts and spring storms strain original or undersized torsion springs, and the door goes out of balance. Homeowners often blame the opener when it’s actually spring fatigue, which is a safety issue worth flagging.
- UV damage on older wood and vinyl-faced doors. Summer heat and intense UV fade and warp older wood and vinyl-faced doors, which then fail to seal and start dragging on the track. That’s a good sign the door has reached replacement age.
See the difference
Before
After
Before
After
Before
AfterPricing for Garage Door Installation in Englewood, CO
A typical new garage door installation in Englewood runs $700 – $2,200, and a garage door repair on an existing door runs $150 – $600. Those ranges cover a lot of ground because the work does: a standard single-car steel door on a straight opening is at the low end, while custom track mounting, header reinforcement, and a high-cycle torsion system on a low-clearance ranch opening push toward the top. Hail-rated or wind-rated steel doors and custom sizing also move the price. The written estimate sets the final price, and the number is quoted and agreed before any work starts. Call (866) 369-6074 for a free estimate.
| Service | Typical Estimated Range |
|---|---|
| New Door Installation | $700 – $2,200 |
| Garage Door Repair | $150 – $600 |
We Also Serve Cities Near Englewood
Our garage door installation team covers Englewood and the surrounding communities, including Virginia Village, Platt Park, University Park, and Southmoor Park. If you’re just over the line in any of these, we can still help with a free estimate on a new door. The same low-clearance and hail considerations apply across much of this area.
Serving Englewood, CO – Our Local Coverage Area
We serve Englewood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Garage Door Installation in Englewood
In most cases, yes: a wind-rated door is the sound choice for an Englewood home, given Front Range Chinook gusts and spring storms. Wind ratings matter most on older homes with original framing, where a door that isn’t rated can rack the tracks in a gust. Ask your city’s building department what the local code expects for your address, and we’ll match the door to it. Call (866) 369-6074 for a free estimate – the price is quoted and agreed before any work starts.
Yes. A low-clearance opening on a 1960s Englewood ranch can still take a new sectional door; it just needs custom track mounting and header reinforcement rather than standard dimensions. The technician measures the rough opening first and frames accordingly before the door is ordered. That extra step is normal here. Call (866) 369-6074 to book a free measure and a written price.
If your steel or aluminum door shows dents across multiple panels, or the panel profile is discontinued so a match isn’t available, replacement is usually the right call over patching. Single-panel dents on a current model can often be replaced panel-only, but mismatched panels can undercut the door’s wind rating. A technician can assess it in person. Call (866) 369-6074 for a free estimate.
Standard torsion springs are rated for roughly 10,000 cycles, while high-cycle springs are rated for about 25,000, so they last longer under daily use. For a busy Englewood household, high-cycle springs are the better fit and pair well with a heavier wind-rated door. We’ll recommend the right rating for your door weight and usage. Call (866) 369-6074 for a free estimate.
A new door can help, especially if your current door is warped, faded, or fails to seal at the threshold. A properly fitted door with intact weatherstripping keeps more conditioned air inside the garage, which matters on an attached garage. The gain depends on the door’s insulation and how well it seals. Call (866) 369-6074 for a free estimate – the written estimate sets the final price.
Get a Free Estimate on Your Englewood Garage Door Installation
Whether your door is a hail-damaged steel panel on a 1970s tract home near the Tech Center or the original wood door on a 1950s ranch off South Broadway, we’ll measure the opening, check the framing, and give you a written price before anything is ordered. Call (866) 369-6074 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. The price is quoted and agreed before any work starts.
Written by the team at Garage Door Repair Washington Park.